Product Information
⚠ WARNING: This product can expose you to chemicals, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Elkay LK463 3 Sets of 14 Hex Head Screws
Model LK463 Description
Our standard clips/screws/lugs that are supplied with most of our top mount self-rimming sinks are designed for standard countertop thicknesses up to 3/4" (19mm) thick. For countertop thicknesses over 3/4" (19mm) – choose from the selection below based on the installation method and countertop thickness.
3 sets of 14 hex head screws, 28 hex nuts and 1 set of clips for "U" channel installation sinks. Choose the appropriate screw length for different countertop thicknesses. Designed to accommodate thicker countertops up to 2-1/2" (64mm) thick.
NOTE: When installing "U" channel sinks in countertops over 2-1/2" (64mm), use #8-32 round machine screws with (2) hex nuts. Length of screw should be 1/2" (13mm) longer than thickness of the countertop. 2 hex nuts are needed per machine screw (1 for installation under the U-channel and 1 for under the clip).
⚠ WARNING: This product can expose you to chemicals, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Elkay LK463 3 Sets of 14 Hex Head Screws
Model LK463 Description
Our standard clips/screws/lugs that are supplied with most of our top mount self-rimming sinks are designed for standard countertop thicknesses up to 3/4" (19mm) thick. For countertop thicknesses over 3/4" (19mm) – choose from the selection below based on the installation method and countertop thickness.
3 sets of 14 hex head screws, 28 hex nuts and 1 set of clips for "U" channel installation sinks. Choose the appropriate screw length for different countertop thicknesses. Designed to accommodate thicker countertops up to 2-1/2" (64mm) thick.
NOTE: When installing "U" channel sinks in countertops over 2-1/2" (64mm), use #8-32 round machine screws with (2) hex nuts. Length of screw should be 1/2" (13mm) longer than thickness of the countertop. 2 hex nuts are needed per machine screw (1 for installation under the U-channel and 1 for under the clip).
